Fueling; Fuel Information; Mixing Ratio; Filling With Fuel - Solo 105 Instructions D'emploi

with your hands. To do this, insert the hook
into one of the various fixing holes. To release
the single shoulder strap, open the bayonet
fitting by pushing together the catch. The hook
in the bottom part of the strap can remain
attached to the equipment. With all other
fasteners, release the hook from the strap.

6. Fueling

6.1 Fuel information

1. (The following information regarding the fuel
information and the mixing ratio apply to mod-
els 105, 106L and 106B. For model 106R, orient
yourself on the enclosed operation instructions
for the Fuji-Robin four-stroke engine.) The en-
gine of devices 105, 106L or 106B is a high-per-
formance two-stroke engine, which must be
operated with a petrol-oil mixture (petrol and
oil = fuel mixture) or must be operated with a
special fuel mixture for two-stroke engines
available from your trade supplier.
2.Lead-free normal gasoline or lead-free super
gasoline can be used for the fuel mixture
(minimum octane 92 ROZ)
Unsuitable fuels or deviations in the mixing ratio
can result in serious damage to the motor!
Avoid direct skin contact with gasoline
and avoid inhaling gasoline fumes -
health hazard!

6.2 Mixing ratio

1. For the first five tanks always use a mixing
relationship of 25 : 1 gasoline to oil (4%).
Starting with the sixth tank we recommend
the use of the special 2-stroke oil we offer,
„Castrol TT in a mixing ratio of 50 : 1 (2%).
For other brands of 2-stroke oil we recom-
mend a mixing ratio of 25 : 1 (4%).
2. Do not store the mixture longer than 3-4 weeks.
1000 cm 3 (1 Liter)
5000 cm 3 (5 Liter)
3
10000 cm (10 Liter)
Castrol-Oil TT 2-stroke-Oil
25:1 (4%)
50:1 (2%)
20 cm 3
40 cm
3
100 cm
200 cm
3
200 cm
400 cm

6.3 Filling with fuel

When filling with fuel comply with the safety
directives. Only fuel with motor turned off.
The fill area must be kept clean. Position the
power tool in such a manner that the tank cap
is up and fill the fuel mixture only to the
lower edge of the duct. To avoid contami-
nants in the tank, use a sieve funnel if possi-
ble. After filling screw the tank cap on firmly.
FIG. 16
1
We recommend having the fuel filter (1)
changed once a year by a specialized work-
shop.
7. Start motor/ Stop motor
7.1 Setting half throttle (models 105, 106L and 106R)
FIG. 17
3
3
3
Place the stop switch (3) to "Start".
Full extend the throttle lever (1).
Push in the half throttle detent (2), and re-
lease the throttle lever.
27