Use; Maintenance And Repair; Training; Inappropriate Use - Dea LOOK 350 Notice D'emploi Et Avertissement

Connection for the basic 230V with limit switches
FCA
COM
FCC
CHIUDE
COMUNE
APRE
Connection for the basic 24V with limit switches
FCA
COM
FCC
CHIUDE
APRE
Connection for 230V with encoder
green
CHIUDE
COMUNE
APRE
After the installing, limit switches must be adjusted (only for
models that foresee them) as follows (see pag. 37):
• Unscrew the A fixing nuts so to operate on C and D screws
• Adjust opening and closing limit switches
• Screw the A fixing screws by keeping C and D blocked by a
screwdriver so to maintain the adjustments
Program the control board to complete all adjustments. It
is now possible to supply a complete installation in compliance
with all standards required for gate automation. See the instruc-
tions provided with the control panel to be connected.
Finally, verify that all adjustments operations have been cor-
rectly performed and that safety devices and unlocking device
properly work.
WARNING All the other adjustment/setting operations
are made by the manufacturer. Tampering with these settings
may cause malfunction and/or situations of risk to people,
animals and property. Refrain from performing any opera-
tions not authorised by DEA System.

4.5.3 Use

The product is destined for incorporation in the assembly of
devices that comprise the gate automation. DEA System assu-
mes that it will always be used in compliance with the standards
and regulations in force.
All LOOK models are equipped with an unlocking device
with the following operation:
• Disconnect power supply
• Turn the black plastic cover so to discover the shaped hole
• Insert the unlocking handle (F4 pag. 40)
• Turn it at 90°
Operating instructions and warnings
• At this point LOOK is unlocked and if no other obstructions
• The opposite procedure returns LOOK operator to normal
FCA
4(marrone) N.C.
• Remember to protect the lock with the respective cover so
5(blu)
6(blu)
N.C.
7(marrone)
FCC
1(bianco)
2(blu)
M
3(nero)

4.5.4 Maintenance and repair

re long working life (see also "Warranty"). Consult the "TROU-
BLESHOOTING" table (see page 12) whenever anomalies are
observed in order to find the solution to the problem and con-
FCA tact DEA System directly whenever the solution required is not
4(marrone)
N.C.
provided.
5(blu)
6(blu)
N.C.
duled in the "complete automatism maintenance register" are:
7(marrone)
FCC
2(blu)
M
1(rosso)
brown
}
green
ENCODER
white
1(bianco)
2(blu)
M
3(nero)
4.6
complete automatism must be carefully illustrated to the final
user. LOOK gate operator requires careful instruction on the
unlocking device (see "Enclosures") in particular and the respec-
tive maintenance schedule (see Point 4.5.4.).
4.7
conditions for which the product has been designed and tested.
The product must never be used for other purposes.
only for qualified personnel
are present, the gate is free to move
working conditions
that the operator is protected by water or powder (even when
it remains unlocked for a long time)
WARNING during this operation gate may perform uncon-
trolled movements: operate with extra care so to avoid any risk.
Good preventive maintenance and regular inspection ensu-
The inspection/maintenance operations to be routinely sche-
INTERVENTION TYPE
cleaning of external surfaces
checking of screw tightening
checking of unlocking device
operation
greasing of articulated joint
WARNING All installation, maintenance, cleaning or re-
pair operations on any part of the system must be performed
exclusively by qualified personnel with the power supply di-
sconnected working in strict compliance with the electrical stan-
dards and regulations in force in the nation of installation.
WARNING The use of spare parts not indicated by DEA
System and/or incorrect re-assembly can create risk to people,
animals and property and also damage the product. For this
reason, always use only the parts indicated by DEA System
and scrupulously follow all assembly instructions.

Training

After installation and setting, the correct operation of the
WARNING Awareness of the operation of LOOK
unlocking device (see F4 Page 40) is essential for all users of
the automation because the failure to use the device quickly
during emergencies can jeopardise people, animals and pro-
perty. An enclosure to these instructions, which the installer is
required to deliver to the final user, illustrates operation and
can be detached.

Inappropriate use

Chapter "4.4 Appropriate conditions of use" describes the
WARNING The use of the product under unusual condi-
tions not foreseen by the manufacturer can create situations
of danger, and for this reason all the conditions prescribed in
these instructions must be respected.
WARNING To ensure compliance with regulations and
safe operation of the motor, we recommend to use DEA Sy-
stem control panels only.
L O O K
PERIODICITY
6 months
6 months
6 months
1 year
11