Overview; Product Conformity; Residual Risk Warnings; Models And Contents Of The Package - Dea LOOK 350 Notice D'emploi Et Avertissement

Operating instructions and warnings
LOOK
only for qualified personnel
Electro-mechanical ram for swing gates
Operating instructions and warnings
INDEX
Declaration by manifacturer ..........................1
OVERVIEW .......................................................8
1 PRODUCT CONFORMITY ..................................8
2 RESIDUAL RISK WARNINGS ............................8
3 MODELS AND CONTENTS OF THE PACKAGE ...8
4 OPERATING INSTRUCTIONS ...........................9
4.1 Product description ................................9
4.2 Technical data ........................................9
4.3 Labelling information ............................9
4.4 Appropriate conditions of use ..............9
4.5 Instructions for risk-freeoperation ......10
4.5.1 Installation, assembly
and disassembly - 10
4.5.2 Starting and adjustment - 10
4.5.3 Use - 11
4.5.4 Maintenance and repair - 11
4.6 Training ...............................................11
4.7 Inappropriate use ................................12
5 SPARE PARTS LIST ..........................................12
6 COMPLETE CLOSING ASSEMBLY ...................12
6.1 Minimum level of protection
provided by the safety edge ................12
6.2 Crushing in the opening area .............12
6.3 Impact in the opening/closing area ....12
Example of typical installation ............32
ANNEXES
- Instructions for the end user (central detacha-
ble file)
- Warranty terms

OVERVIEW

AIM OF THE INSTRUCTIONS
These instructions were prepared by the manufacturer and
are an integral part of the product. The operations described
are intended for adequately trained and qualified operators and
must be carefully read and conserved for future reference.
Chapters "2 RESIDUAL RISK WARNINGS" and "4 OPERA-
TING INSTRUCTIONS" contain all the information that DEA Sy-
8
stem provides in order for the product to constantly satisfy the
Essential Safety Requirements prescribed by the Machinery Di-
rective (European Directive 2006/42/CE).
Read these chapters carefully because they contain impor-
tant instructions for safe installation, use and maintenance and
important warnings regarding the residual risks remaining even
after all the safety devices and measures described have been
applied.
The product is designed for installation in complete closing
systems subject to specific legislation. Chapter 6 "COMPLE-
TE CLOSING ASSEMBLY" provides useful information for the
respect of the Essential Safety Requisites for special types of
closing.
L O O K

1 PRODUCT CONFORMITY

The LOOK electromechanical operator bears the CE label.
DEA System guarantees the conformity of the product to Eu-
ropean Directives 2006/42/CE regarding machinery safety,
2004/108/CE electromagnetic compatibility and 2006/95/CE
low voltage electrical equipment. DEA System also encloses the
manufacturer's Declaration of Conformity with these instructions
(see Directive 2006/42/CE Art. 4, paragraph 2).

2 RESIDUAL RISK WARNINGS

Read these warnings carefully; the failure to respect the fol-
lowing warnings can create risk situations.
WARNING The use of the product under unusual condi-
tions not foreseen by the manufacturer can create situations
of danger, and for this reason all the conditions prescribed in
these instructions must be respected.
WARNING Under no circumstances must the product be
used in explosive atmospheres or surroundings that may pro-
ve corrosive and damage parts of the product.
WARNING All the other adjustment/setting operations
beyond the adjustment of the oil flow are made by the manu-
facturer. Tampering with these settings may cause malfunction
and/or situations of risk to people, animals and property. Re-
frain from performing any operations not authorised by DEA
System.
WARNING The use of spare parts not indicated by DEA
System and/or incorrect re-assembly can create risk to people,
animals and property and also damage the product. For this
reason, always use only the parts indicated by DEA System
and scrupulously follow all assembly instructions.
WARNING Awareness of the operation of LOOK key-
release mechanism (see F4 Page 40) is essential for all users
of the automatism because the failure to use the device qui-
ckly during emergencies can jeopardise people, animals and
property. Enclosure to these instructions, which the installer is
required to deliver to the final user, illustrates operation and
can be detached.
A6
WARNING In line with EU Directive 2002/96/EC for wa-
ste electrical and electronic equipment (WEEE), this electrical
product must not be disposed of as unsorted municipal waste.
Please dispose of this product by returning it to your local mu-
nicipal collection point for recycling.
3 MODELS AND CONTENTS
OF THE PACKAGE
The name LOOK identifies a series of electro-mechanical
gate operators with different features depending on size, locking
functions and motor power supply.
Articles included in the LOOK series are listed in the "AVAI-
LABLE MODELS" table.
ENGLISH
A1
A2
A4
A5