Connecting To The Smoke It® App - Pit Boss PRO Série Manuel D'installation Et Fonctionnement

Masquer les pouces Voir aussi pour PRO Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SETTING UP A RECIPE
The Recipe function allows the user to program cooking instructions, known as Recipe Steps, for the Control Board to follow
and automatically run. These cooking instructions are a combination between Cooking temperature and Time. Starting from
the first Recipe Steps (01), the Control Board will cycle through each Recipe Steps to cook the meal. When all the Recipe Steps
are complete, the Control Board will automatically switch to a low temperature of 82°C / 180°F so that the meal stays warm
until ready to serve. There are a total of nine Recipe Steps available to be programmed.
HOW TO PROGRAM A RECIPE STEP
To set one or more of the Recipe Steps, follow the steps below:
1.
Press and hold the Recipe Button. This will make the Recipe Button blink to show the Recipe settings are
active. This will also activate the Recipe Steps and the letter 'S' will be on to show it is active.
Use the Controller Knob to select the Recipe Step. Start with the first Recipe Step (01).
When desired Recipe Step is reached, press the Controller Knob to go to next setting.
2. Set the Time hours. The hours of the Time readout will blink, to show it is selected.
Use the Controller Knob to select the hours desired.
When desired hours are reached, press the Controller Knob to go to next setting.
3. Set the Time minutes. The minutes of the Time readout will blink, to show it is selected.
Use the Controller Knob to select the minutes desired.
When desired minutes are reached, press the Controller Knob to go to next setting.
4. Set the Temperature. The central temperature readout will blink, to show it is selected.
Use the Controller Knob to select the desired temperature.
When desired temperature is reached, press and hold the Recipe Button to lock in all Recipe settings
for that Recipe Step.
To set another Recipe Step, quick press the Recipe Button to select another Recipe Step,
programming a multiple Recipe Step cook. Repeat steps above, as desired.
Or,
Press and hold the Recipe Button a second time to exit the Recipe settings and run the Recipe.
The Recipe Button will stop blinking.
NOTE: The Recipe Steps will reset when the unit is shut-down / turned off.
CONNECTING TO THE SMOKE IT® APP
Follow these instructions on how to connect your grill to the Smoke iT® app with your Android™ or iOS® device. The app will allow
you to control and monitor your grill and meat probe temperatures from your mobile device. Enjoy the benefits that Smoke IT®
mobile connectivity has to offer!
1.
Download the Smoke iT® app. Open the app and allow Bluetooth® to be enabled for setup. New users will need to create
an account and follow the prompts to login.
2. If you are within Bluetooth® range (9 m / 30 ft), the Smoke iT® app will automatically detect your grill. Select your grill
model. If you do not see your grill on the screen, ensure your unit is connected to a power source and is turned on.
3. Name your grill model (ie. My Smoker) in the app and select "Connect" at the bottom of the screen. This will save your
grill model in the devices menu.
4. From the devices menu, click the grill model to connect. This will show you the control board screen.
5. Click the settings option (gear) in the top-right corner, enter your Wi-Fi credentials, then click the check mark at the
bottom of the screen to connect. Now both Bluetooth® and Wi-Fi (cloud) icons will show on the devices menu, showing
that the grill is connected.
While using the app, the screen will shine bright when the grill is active and connected. If the app screen or grill goes
dark on the devices menu, check your wireless connection or power source.
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro pb850ps2919311256438549255026

Table des Matières