Dab Mode; Scanning Stations; Manual Tune - TechniSat DIGITRADIO 225 Mode D'emploi

DAB Mode

When you turn on the radio it will automatically search and store all the available stations. You
should conduct an additional Full Scan to ensure all stations are picked up and stored. It is also
recommended every few months to run a new scan to pick up any new DAB/DAB+ that may have
begun broadcasting after purchasing your DAB radio.
1. For initial use, radio will carry out a full scan and store stations list in memory
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric
order. The first station in the list will be automatically selected to broadcast, press
SCROLL&SELECT/SNOOZE knob to broadcast.
@
if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your
Note:
radio to a stronger signal area.

Scanning Stations

Press and hold INFO/MENU button, turn SCROLL&SELECT/SNOOZE knob to select 'Full scan',
and then press SCROLL&SELECT/SNOOZE knob to full scan.

Manual Tune

This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1. Press and hold INFO/MENU button, turn SCROLL&SELECT/SNOOZE knob to select
'Manual tune', and then press SCROLL&SELECT/SNOOZE knob to confirm, the display will
show the channel number and frequency.
2. Turn SCROLL&SELECT/SNOOZE knob to select the channel you wanted, and then press
SCROLL&SELECT/SNOOZE knob to confirm. If there is a multiplex on this channel, the
multiplex name will be shown. A signal strength bargraph will be displayed
@
Note: The new stations will be added to station list automatically.
3. To play the station, first press and hold INFO/MENU button twice to exit manual tune.