Setting Equaliser; Setting Time; Setting Backlight - TechniSat DIGITRADIO 225 Mode D'emploi

Alarm duration time
15 minutes
30 minutes
45/60/90 minutes
6. To turn off alarm, press VOLUME/
standby.
7. To cancel Alarm, refer to steps1-3 to enable alarm 'Off'.

Setting Equaliser

This feature enables you to set a sound equalization profile. The equalization setting will change
the tone of the sound from your radio.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select 'Equaliser', press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse through 'Treble' and 'Bass', and then
press SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to set the level of Treble and Bass among '-3' to
'+3', and then press SCROLL&SELECT/SNOOZE knob to confirm.

Setting Time

1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select 'Time', press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select options, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.
Set Time/date:
Auto update:
Set 12/24 hour format:
Set date format:
3. Then setting time according to your personal preference.

Setting Backlight

1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select 'Backlight', press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select 'Power on' or 'Standby', then press
SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to select backlight level, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.
Snooze time
5 or 10 minutes
5, 10 or 15 minutes
5, 10, 15 or 30 minutes
knob when the alarm sounds and then unit will go to
Manually set-up both Time and Date
'Update from Any', 'Update from DAB', 'Update
from FM' or 'No update'
'Set 24 hour' or 'Set 12 hour'
'DD-MM-YYYY' or 'MM-DD-YYYY'