Troubleshooting - TechniSat DIGITRADIO 225 Mode D'emploi

Troubleshooting

If a problem occurs, it may often be due to something very minor. The following table contains
various tips.
Problem
How long do I charge the
battery before first use?
Does my unit use battery
when on standby?
Is it safe to use power
adaptor together with the
battery?
No Power.
The unit does not respond
when pressing any buttons.
Poor radio reception.
Desired station not found.
I cannot find "DigitRadio
225" on my Bluetooth
device.
If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect
it again.
Solution
l
Keep mains power connecting and charge the battery for
12 hours before first time use.
l
Unit use battery on standby if mains power is not
connected.
l
Mains power is used when use power adaptor together
with the battery and the charge current will be cut off by
protection circuit once battery is fully charged.
l
Ensure the mains cable is properly connected or battery
power is not used up.
l
Make sure that the unit is turned on.
l
The unit may freeze up during use. Switch the unit off
and then on again to reset it.
l
Make sure the antenna is fully extended.
l
Electrical interference in your home can cause poor
reception. Move the unit away from them (especially
those with motors and transformers).
l
Weak signal. Search manually.
l
Ensure the Bluetooth function is activated on your
Bluetooth device.
l
Re-pair the unit with your Bluetooth device.