Dab Mode; Selecting Another Station; Secondary Service; Scanning Stations - TechniSat DigitRadio 80 Mode D'emploi

Technisat

DAB Mode

When you turn on the radio it will automatically search and store all the available stations. You should
conduct an additional Full Scan to ensure all stations are picked up and stored. It is also
recommended every few months to run a new scan to pick up any new DAB/DAB+ that may have
begun broadcasting after purchasing your DAB radio.
1. For initial use, radio will carry out a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order.
The first station in the list will be selected, press ENTER button to broadcast.
"
if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to
Note:
a stronger signal area.

Selecting another Station

While a program is playing, turn NAVIGATE knob to show station list and select the station you want
to play, and then press ENTER button to confirm.

Secondary Service

You may see a ">>" symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are related to
the primary station. E.g. a sports station may want to add extra commentaries. The secondary
services are inserted directly after the primary station (a "<<" symbol is before the name of the station)
in the station list.
To select the secondary station, turn NAVIGATE knob until you find the secondary service you want,
and then press ENTER button to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.

Scanning Stations

Simply press SCAN button to scan for all available stations.
Alternatively, press MENU button, turn NAVIGATE knob to select Full scan, and then press ENTER
button to scan.
8
DigitRadio 80