Honda EM50is Manuel De L'utilisateur page 20

i-Monitor
The i-Monitor is a user interface that allows the operator to view (when
the generator is running) total operating time in hours, generator
output, engine RPM, battery voltage, and error messages. The different
display modes are selected by pressing the i-Monitor button.
i-Monitor at Start Up
During start up, the i-Monitor display and all three indicators will
simultaneously blink once. The condition of the i-Monitor display and all
three indicators can be checked with the aid of an observer. Once the
generator is running, the Output indicator (green) and the i-Monitor
display will remain lit.
Backlight blinks
When turning the engine switch to the ON position with having not
start the engine over 30 seconds, display starts to blink.
Please start the engine or turn the engine switch to the OFF position.
i-Monitor Display
The i-Monitor display is divided into two screens. The single-digit
screen display the i-Monitor mode which is represented by a number 1
through 4. The four-digit screen displays the four mode values total
operating hours, power output, engine RPM and battery Voltage or any
activated error messages.
i-MONITOR BUTTON
SINGLE-DIGIT SCREEN DISPLAY FOUR-DIGIT SCREEN DISPLAY
18