Remote Control - Casada QUATTROMED V Mode D'emploi

Remote control

1| POWER
Turn ON/OFF the power.
2| HEIGHT
When [Area]/[Auto] function is selected, press [Height] to select the lower limit of
height. To exit the height limit function press [Height] again.
3| AUTO PROGRAMME
The massage device is equipped with 3 auto programmes. Press [Program], the unit
is working during the cyclic switching of Mode 1 (Blue)/ Mode 2 (Green)/ Mode 3
(Red). The motor will preset first, and after finishing presetting, the unit starts the auto
mode.
4| HEATING
The [Heating] function is activated at the beginning of following programmes [Tap-
ping]/[Shiatsu]/[Auto]/[Area]. Press [Heating] button during massage to exit or switch
on again the heating function.
5| VIBRATION
The [Vibration] can be switched on and off at any time during [Tapping] / [Shiatsu]
/ [Auto] / [Area] programme. Press [Vibration] button to start vibration function. The
vibration will run in 1,5 min rhythm.
6| SHIATSU
Press [Shiatsu] button to start Shiatsu function. The default speed is middle. If the unit
works in auto mode, it will exit from auto mode automatically. Press [Shiatsu] again to
exit.
7| TAPPING
Press [Tapping] button to start tapping function. The default strength is middle. If the unit
works in auto mode, it will exit from auto mode automatically. Press [Tapping] again to
stop tapping function.
8| SLOW – FAST
The [Slow – Fast] function will only work when [Tapping] is selected. Press [Slow – Fast]
button and the tapping strength will automatically cycle from weak to strong.
9| FAST – SLOW
The [Fast – Slow] function will only work when [Tapping] is selected. Press [Fast – Slow]
button and the tapping strength will automatically cycle from strong to weak.
10| WIDTH
The [Width] function is only available with [Tapping] function. It does not work with
[Shiatsu] function. Press [Width] button -1st -2nd -3rd step- the massage heads will
enlarge from narrow to middle to wide and back. Press [Width] button -4th step- the
device activates an continuously massage heads cycle from narrow to wide.
11| FAST
The tapping strength is classified into 3 levels: High-Middle-Low. The [Fast] button will
only work when [Tapping] is selected. Press [Fast] button and the tapping strength will
enhance to a higher level.
12|
SLOW
The tapping strength is classified into 3 levels: High-Middle-Low. The [Slow] button will
only work when [Tapping] is selected. Press [Slow] button and the tapping strength will
decrease to a lower level.
22
Remote control
13| LO
The Shiatsu strength is classified into 3 levels: High-Middle-Low. The [LO Shiatsu
Speed] will only work when [Shiatsu] is selected. Press [LO Shiatsu Speed] button and
the shiatsu strength will decrease to a lower level.
14|
HI
The Shiatsu strength is classified into 3 levels: High-Middle-Low. The [HI Shiatsu Speed]
will only work when [Shiatsu] is selected. Press [Hi Shiatsu Speed] button and the
shiatsu strength will enhance to a higher level.
15| UP/DOWN
Control keys of the massage heads for exact positioning on your back. During the lo-
calised massage, you can alter the massage area upwards or downwards by holding
down this button.
16|
FULLBACK
This automatic programme is for the entire
back. Calming massage of the individual
parts of the entire back with massage
technique "Rolling". Optionally, the follow-
ing functions can be activated [Tapping]/
[Shiatsu]/[Heating]/[Vibration].
17| UPPER
This automatic programme is for the up-
per back area. Calming massage of the
individual parts of the upper back with
massage technique "Rolling". Optionally,
the following functions can be activated
[Tapping]/[Shiatsu]/[Heating]/[Vibration].
18| LOWER
This automatic programme is for the
lower back area. Calming massage of
the individual parts of the lower back with
massage technique "Rolling". Optionally,
the following functions can be activated
[Tapping]/[Shiatsu]/[Heating]/[Vibration].
1
2
3
6
4
7
5
10
8
11
15
14
13
15
9
12
16
17
18
23