Specifications - Honda GX270 Manuel De L'utilisateur

Specifications

GX270 (with fuel tank)
Length×Width×Height
Dry mass [weight]
Engine type 4-stroke, overhead valve, single cylinder
Displacement
[Bore×Stroke]
Net power
(in accordance
with SAE J1349*)
Max. net torque
(in accordance
with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including
the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
GX340 (with fuel tank)
Length×Width×Height
Dry mass [weight]
Engine type 4-stroke, overhead valve, single cylinder
Displacement
[Bore×Stroke]
Net power
(in accordance
with SAE J1349*)
Max. net torque
(in accordance
with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including
the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
381×428×418 mm
25.4 kg
3
270 cm
[77.0×58.0 mm]
6.3 kW(8.6 PS) at 3,600 rpm
19.1 N·m (1.94 kgf·m) at
2,500 rpm
1.1 L (1.0 lmp qt)
4.1 L (0.90 lmp gal)
Forced air
CDI type magneto
Counterclockwise
406×460×448 mm
31.8 kg
3
389 cm
[88.0×64.0 mm]
8.0 kW(10.9 PS) at 3,600 rpm
26.4 N·m (2.69 kgf·m) at
2,500 rpm
1.1 L (1.0 lmp qt)
4.7 L (1.03 lmp gal)
Forced air
CDI type magneto
Counterclockwise
GX390 (with fuel tank)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance
with SAE J1349*)
Max. net torque
(in accordance
with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including
the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
Tune-up Specifications GX270/340/390
ITEM
Spark plug gap 0.7–0.8 mm
Idle speed 1,400±150 rpm
Valve clearance IN: 0.15±0.02 mm
(cold) EX: 0.20±0.02 mm
Other
specifications
ENGLISH
406×460×448 mm
31.8 kg
4-stroke, overhead valve, single cylinder
3
389 cm
[88.0×64.0 mm]
8.7 kW(11.8 PS) at 3,600 rpm
26.5 N·m (2.7 kgf·m) at
2,500 rpm
1.1 L (1.0 lmp qt)
4.7 L (1.03 lmp gal)
Forced air
CDI type magneto
Counterclockwise
SPECIFICATION MAINTENANCE
Refer to page: 10
Refer to page: 11
See your servicing
dealer
No other adjustments needed.
15