Air Index; Specifications; Tuneup Specifications - Honda GX100 Manuel De L'utilisateur

Air Index

An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating the engine's emission durability period. The
descriptive term indicates the useful life period for the engine's
emission control system. See your Emission Control System
Warranty for additional information.
Descriptive Term Applicable to Emissions Durability
Period
Moderate
125 hours [greater than 65 cm (65 cc)]
Intermediate 125 hours [0 65 cm (0 65 cc)]
250 hours [greater than 65 cm (65 cc)]
Extended 300 hours [0 65 cm (0 65 cc)]
500 hours [greater than 65 cm (65 cc)]
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
14
50 hours [0 65 cm (0 65 cc)] − −
− −
− −

Specifications

SD-Type (basic type)
Length × Width ×
Height
Dry weight
Engine type
Displacement
[Bore × Stroke]
Max. output
Max. torque
Max. rotation with no
load
Engine oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation

Tuneup Specifications

ITEM
Spark plug gap 0.60 0.70 mm
(0.024 0.028 in)
Idle speed 1,550
Valve clearance IN: 0.15
(cold) EX: 0.20
Other
specifications
ENGLISH
286 × 304 × 402 mm
(11.3 × 12.0 × 15.8 in)
10.6 kg (23.4 lbs)
4-stroke, overhead valve, single cylinder
98 cm (6.0 cu-in)
[56 × 40 mm (2.2 ×
2.2 kW (3.0 PS, 3.0 bhp) at 3,600 rpm
5.7 N·m (0.59 kgf·m, 4.3 lbf·ft) at
3,600 rpm
4,000 200 rpm ±
0.40 (0.42 US qt , 0.35 Imp qt)
1.2 (0.32 US gal , 0.26 Imp gal)
327 g/kWh (240 g/PSh, 0.54 lb/hph)
Forced air
Transistorized magneto
Counterclockwise
SPECIFICATION MAINTENANCE
− Refer to page: 9
−
± 150 rpm Refer to shop
manual
± 0.04 mm See your
± 0.04 mm authorized
Honda dealer
No other adjustments needed.
1.6 in)]