Output Data - Tanita WB-3000 Manuel De L'utilisateur

Output data

Name of item
Control data
Control data
Control data
Control data
Model
Height
Weight
BMI
Checksum
• The data are divided with commas (,) for each data.
ote:
• The terminator (end of the data) is CR (ASCII code 0DH), LF (ASCII code 0AH).
• The control data for the items 1 – 4 are for expansion. They are not used presently so the receiving side can ignore them.
• When the measurement unit is select the "lb",all the hight data is converted into "ft-in" and it is output.
• Because of its specifications, the scale will output an irrelevant signal approximately 0.1 second after data output. Make sure you ignore this signal and do
not import it.
[Output example (in the case to lb unit)]
10
Header
kg mode lb mode
{ 0 Fix to 16
˜0 Fix to 1
˜1 Fix to 1
˜2 Fix to 1
MO "WB-3000"
Hm Hf xx.x
Wk Wp xxx.x
MI xxx.x
CS xx
Output data (ASCII code)
2 Bytes fixed
1 Byte fixed
1 Byte fixed
1 Byte fixed
9 Byte fixed
2 – 6 bytes
3 – 5 bytes
3 – 5 bytes
2 Bytes fixed
Pattern
BMI mode Weight mode