Measuring Height Procedure - Tanita WB-3000 Manuel De L'utilisateur

The user should step on the platform without wearing shoes for accurate
measurement.
Always have someone assist the user for accurate measurement.
1) Adjust the Height Rod Arm position before the user steps on the platform. Place
If the subject is taller than 48" / 120 cm, pull the Height Rod Sliding Block and Height
hand on the Height Rod Arm.
Rod Arm at the same time upward so that the arm is positioned higher than the subject's
head.
If the subject is shorter than 48" / 120 cm, move the Height Rod Arm down.
2) Gently lower the Height Rod Arm until the Height Rod Arm touches the very top of the
user's head.
If the subject is taller than 48" / 120 cm,
3) Read the measurement.
read the number just above the top of the
Upper Pillar Column (see example #1).
If the subject is shorter than 48" / 120cm,
read the number below the Height Rod
Arm (see example #2).
Example #1:
58"(147.5 cm)
8

10. Measuring height procedure

measure the height of
48" / 120cm or more
READ HERE
Reading the height
measurement of
48" / 120cm or MORE
To avoid danger of breaking or coming loose, you must
hold the height rod arm securely.
CORRECT way to
Reading the height
measurement of
48" / 120cm or LESS
Correct way to hold
the Height Rod Arm
Incorrect way to hold
the Height Rod Arm
INCORRECT way to
measure the height of
48" / 120cm or more
Example #2:
36.25" (92 cm)