Operation; Standard Weighing Procedures - Tanita WB-3000 Manuel De L'utilisateur

(or
6

9. Operation

1. Standard Weighing Procedures

1) Turn on the power by pressing the
2) After all the segments flash, [0.0lb/0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. "
When the scale is connected to an external device, weight data will be exported at this time.
left corner of the display.
5) The scale will automatically shut off in 30 seconds.
ote: • Do not press the ON key while standing on the scale, as accurate measurement will not be possible.
2. BMI Weighing
1) Turn on the power by pressing the
2) After all the segments flash, [0.0lb/0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. "
left corner of the display.
)
5) Press the key (or
6) Set the height with the
7) Once the height and weight have been established, press the
The weight and BMI calculation will then be displayed.
When the scale is connecting to an external device, weight, height and BMI data will be exported at this
time.
The setting of height for BMI is can be accomplished in any one of the following means by pressing the
8) The scale will automatically shut off in 30 seconds.
key (or
• Before stepping on the scale.
• After pressing the
• After weight measurement while the weight result remains on the display.
key.
key.
). The default height [5ft7.0in/170cm] will be displayed.
key.
).
key.
(Hold)" sign will appear in the upper
(Hold)" sign will appear in the upper
key.