Pc Software; Maintenance And Cleaning - VOLTCRAFT Ultimate 1000 W Notice D'emploi

20. PC SOFTWARE

First install the software (at least Windows XP or higher) and the drivers on the provided CD before connec-
ting the charger to a computer.
Observe the relevant information on the CD and in the help function of the software to run the software.
• Insert the provided CD into your computer's corresponding drive.
• If the installation program does not start automatically, open the contents on the CD using, for example, Windows
File Manager and start the installer manually.
• Follow the instructions of the software or of Windows.
• Connect the USB connector of the charger via a suitable USB cable (not included) to a free USB port on your
computer.
Windows will recognize the new hardware and will complete the driver installation. You may need to restart Win-
dows.
• Start the software. If you experience problems, run the software as administrator for the purpose of testing.
• Now you can control the charger via the software.
Should a new version of the software be available, it can be downloaded at www.conrad.com from the down-
load area of the respective product's webpage.

21. MAINTENANCE AND CLEANING

The product is maintenance-free for you; therefore, never take the product apart.
Any repair work should be carried out exclusively by a specialist or specialist workshop. Otherwise there is the risk
of destroying the product; the license (CE) and the guarantee/warranty will also expire.
Clean the product only with a soft, clean, dry, lint-free cloth. Do not use cleansers; the housing and the label may be
attacked by them.
Dust can easily be removed with a long-haired, soft, clean brush and a vacuum cleaner.
93