Bosch Rexroth SD301 Mode D'emploi page 32

32/144 Bosch Rexroth AG
3 Setting up the user interface
3.1.4 Error display (4)
Errors in the tightening system are displayed
on every level with a warning triangle.
3.1.5 Log on/Log off button (5)
This button is used to log on to and log off
from the SE/SEH (e.g. to send tightening
programs) and the KE. When logging on, the
user is asked to enter a PIN via the key pad
(see chapter 4). Users that are logged on will
see the symbol.
The user is automatically logged off 15 min-
utes after the final transmission is complete.
3.1.6 Power On Button (6)
Touching this button will bring you from any
menu level back to the Power on menu.
3.2 Display field
IThe parameters for the tightening process
and the system display are shown in the dis-
play field (see chapter 5 and 6).
SD301 | 3 609 929 826/06.03
3.3 Main menu bar (Fig. 5)
.
.
Fig. 5:
The main menu bar shows the menu options
1)
Display, Process , and System Test. Touch-
ing the arrow button will bring you to the sec-
ond section. This is where the System menu
option is located.
The menu option that is currently active has a
thicker border.
3.4 Scroll bar
By touching the arrow buttons, you can scroll
through a list line by line or page by page.
1) Unavailable when the SD301 is ac-
cessing a KE31x communication unit