(3)
(1)
12. Opening out the perforated-sheet
back panel. Sideboard cable
management.
Open out or remove the perforated-sheet back panel.
Release the back-panel lock. Open out the back panel (extent
of opening limited by a steel cable). Release the steel cable
from the back panel by way of knurled nut (1). Remove the
back panel completely.
Refitting the back panel:
Place the back panel in mounting (2). Twist knurled nut (1)
of the steel cable back into the back-panel screw.
(2)
Cable management.
The top surface features a cable outlet (3), through which
the cables can be fed into the interior of the sideboard. In-
side the sideboard there is a mount (4), to which the assor-
ted cables can be secured. The cables (5) can be fed in and
out and secured to clips (6) between the back panel and
the body over the entire base area.
(5)
Caution! Do not coil the electrical cable excessively
when using. This creates the danger of a build-up of
heat. Consult a qualified electrician or uncoil the cable
so that it is only coiled a few turns.
(4)
(6)
35