Linear Table Connector - VS 901 Serie Instructions De Montage

(3)

7. Linear table connector.

Screw the post/leg with V-foot or disk foot with four
M8x25 mm self-tapping hexagon-socket screws to table
connector (1).
Slide table connector (1) with clamp (2) over cross-member
(3) and insert the four M6x16 mm cheese-head screws (4).
Slide the add-on table with cross-member (5) into released
clamp (6) and align the table tops to each other.
30
(1)
(6)
(2)
(4)
(5)
(7)
(8)
Tighten the four M6x16 mm hexagon-socket screws in each
case on both sides (4) and (7).
Screw the table connector with eight 5x20 mm chipboard
screws (8) to the table tops.