Securing The Printer Shelf To Brackets - VS 901 Serie Instructions De Montage

(5)
(4)
(1)

19. Securing the printer shelf to brackets.

Printer shelf. For the U-bracket and the 4-legged table.
Slide flange (3) over the cross-member. Place rectangular
tube (1) with flange from below on the cross-member in
such a way that the screw heads of the U-bracket holder
are sunk in lug openings (5). Screw to the cross-member
with two M6x60 mm cheese-head screws (supplied) (4).
42
(1)
(2)
(3)
The holes for suspending shelf (2) must point outwards.
Before tightening down, suspend the shelf in the desired
position (5) and align parallel to the table top. Then finish
by tightening down.
(2)
(5)