Securing The Cube Container And Sideboard To The Table-Top Cross-Member - VS 901 Serie Instructions De Montage

(6)
(3)
(4)
(1)
6. Securing the cube container and
sideboard to the table-top cross-
member.
(Mounting table top on cube container (1) and sideboard
(5) carcass furniture.)
Gently position clamp (6) with 4 hexagon-socket screws on
carrier plate (3). Slide cross-member (2) underneath clamp
(6) until the clamp is flush with the tube. Now tighten
down the 4 screws.
Release the pivot bearing with lever (4). Turn the container
through the desired angle in relation to the table and
tighten down the connection again with lever (4).
(2)
(3)
(4)
(6) (2)
(3)
(4)
(2)
(5)
(5)
29