Mounting The Cpu Bracket - VS 901 Serie Instructions De Montage

(2)
1
(4)

18. Mounting the CPU bracket.

Important! CPU brackets can be mounted facing in-
wards (1) and facing outwards (2). (If a standing/sit-
ting C-foot is installed, the CPU bracket can only be
mounted facing outwards.)
CPU brackets can be mounted on the right or left side of
the table.
For mounting between the base assemblies (Figure 1).
(with U-brackets and possibly between the mounting brackets).
Slide M6 mm stirrup bolt (supplied) (3) over the cross-
member. Guide CPU bracket (4) from below into the stirrup
bolt and tighten down the two M6x12 mm sleeve nuts (5).
(1)
2
(3)
(3)
(5)
(1)
(2)
(3)
(6)
(4) (5)
For external mounting (Figure 2).
Guide M6 mm stirrup bolt (supplied) (3) through L-bar (6)
and screw on both M6x12 mm sleeve nuts (5). Slide CPU
bracket (4) onto the cross-member and tighten down both
sleeve nuts. Depending on the type of computer, the CPU
bracket can be moved 58 mm. To do so, do not screw stirrup
bolt (3) to L-bar (6) in the middle position.
L-plate (7) on the CPU bracket (Figure 3).
The L-plate is attached to the CPU bracket and can be moved
by the distance of the strut.
Caution!
Do not cover the PC fan with the L-plate!
(7)
3
g
41