Securing The Cable Chain - VS 901 Serie Instructions De Montage

(2)

15. Securing the cable chain.

Cable chain (1).
This is suspended from the cross-rod of cable-tray holder (2).
The cable chain consists of interconnected elements (4).
If there is no textile cable tray, then attach with adapter (3)
for the cable chain and the 4.2x13 mm screws to the moun-
ting-bracket hole or directly to the underside of the table
top (long bit insert required).
38
(1)
(3)
(4)
(1)
(5)
Strain-relief device without textile cable tray.
Secure strain-relief device (5) with two 3x20 mm chipboard
screws under the table top.
Caution! All the cables which are fed to and from the
furniture must be secured at the strain-relief device.
(3)