Becker Traffic Pro Instructions De Montage page 21

Function test of the GAL signal, reverse signal, internal sensors
( )
SENSORS
• In the Service Mode, select
knob and press to confirm.
• Move the vehicle several feets forwards or backwards for the GAL
signal function test.
The number after
speed).
The number after
pressing the accelerator when the vehicle is parked.
• Engage the reverse gear for the reverse signal function test.
The number after
to ).
0
• Drive around a corner to test the function of the internal sensors.
The values after
In order to quit the sensor test, press the
back to the Service Mode.
Subject to correction and technical modifications
using the right rotary
SENSORS
should increase (even at a low
WHEEL:
should not increase if idling or
WHEEL:
should change from
REVERSE:
and should change.
X: Y :
Nav
button. The unit switches
21
MODULE TEST
S E N S O R S
SPEECH TEST
WHEEL: 35150 REVERSE: 0
GYRO: 10
X: _29 Y: _31
to (
0 1 1
Copyright by Becker GmbH, D-76303 Karlsbad
Installation guide