Becker Traffic Pro Instructions De Montage page 19

The number of wheel impulses per wheel revolution (if known) can then
be selected by turning the right rotary knob
If the number of wheel impulses per wheel revolution is not
known,
UNKNOWN
to enter tire data.
The previously entered data is displayed again. If the data entered is cor-
rect select line with data by turning the right rotary knob
press to confirm.
If correction is necessary, select
knob and press to confirm. The values can then be re-entered.
Once the previously entered data has been confirmed, the tire data can
be entered or self-calibration can be started.
To enter the tire data, select
rotary knob and press to confirm.
Enter the correct tire size using the right rotary knob and confirm the en-
try by pressing for more than 2 seconds.
The letter "R" cannot be entered. 3 numbers must be en-
tered before and after the slashes. Insert a "0" for any miss-
ing numbers.
Example: Specification in vehicle registration papers: 185/
55R15 81T
Input into unit: 185/055/015
Then select between
NEW TIRE TREAD
turning the right rotary knob
Subject to correction and technical modifications
and pressing to confirm.
must be selected. It is then not possible
by turning the right rotary
MODI.Y
by turning the right
INPUT TIRE VALUES
and
USED TIRE TREAD
to enter the approximate tread depth value.
19
and then
T U R N :
MODI.Y
S T A R T S E L . - C A L I B R A T I O N
INPUT TIRE VALUES
INPUT TIRES:
TIRE SIZE
01234567890
by
N E W T I R E T R E A D ( > 5 M M )
USED TIRE TREAD (<= 5MM)
Copyright by Becker GmbH, D-76303 Karlsbad
Installation guide
WHEEL IMPULSES
UNKNOWN
0 I N C L : 2 5 I M P : 4 8
'''/'''/'''