Becker Traffic Pro Instructions De Montage page 17

Function test of GPS antenna (
In Service Mode, select
press to confirm.
If Traffic Pro is functioning properly and with GPS reception, the
number of satellites received (e.g.
) and the type of positioning currently possible
14:56:08
are displayed.
At least
.IX 2D
bration. A certain amount of time may be required to reach
this value (do not move the vehicle during this period).
In order to quit the GPS test, press the
back to the Service Mode.
Changing the calibration (
Deleting the calibration:
If the navigation system is removed from one vehicle and installed in
another, it must be recalibrated. However, to do so, the current calibra-
tion data must be deleted.
In the Service Mode, select
knob and press to confirm.
Using the right rotary knob
calibration is deleted and the unit returns to the Service Mode.
Subject to correction and technical modifications
GPS IN.O )
with the right rotary knob
GPS_IN.O
), the date and time (e.g.
5
is required for quick and successful cali-
Nav button. The unit switches
)
CALIBRATION
using the right rotary
CALIBRATION
select and press to confirm. The
DELETE
VERSION
and
G P S I N . O
CALIBRATION
13.03.99
13:03:99 14:56:08
(e.g. )
.IX: 3D
.IX 3D
PD 1.9
GPS IN.O
C A L I B R A T I O N
CALIBRATION RIDE
DO NOT DELETE
D E L E T E
MODI.Y
17
Installation guide
X:5104905
Y:29327722
Copyright by Becker GmbH, D-76303 Karlsbad