Skandika Fitness CARDIOBIKE THESEUS Instructions De Montage Et Mode D'emploi page 37

SET-UP
Step 3: Seat
Fix the seat (K-7) onto the seat slider (K-6) as per the drawing above. The seat can be adjusted ho-
rizontally according to your personal need (arm- and leg-length) by loosing and pulling out the knob
(K-1), sliding the seat slider (K-6) to the desired position and fixing the knob (K-1) again properly.
Loose the pop pin (D-6) on the main frame and slide the seat post (K) onto the rear stem of the main
frame and secure with the pop pin (D-6) in a proper height. The seat should be adjusted up and down,
backward and frontward to fit users personal needs. Properly fix the above connections in order to
avoid injuries caused by a loose seat.
How to use the pop pin (D-6):
The seat support tube
can be fixed at various
heights by loosing and
pulling out the pop pin
(D-6), adjusting the
support tube to the
desired height and
then fix the pop pin
again properly through
one of the drilled holes.
Always pay attention
to the markings for min.
and max. height
adjustments on the
seat post.
The seating height is
correct when the knee
is slightly bent with the
pedal vertically down-
wards and the foot
parallel to the floor.
37