Computer | Use - Skandika Fitness CARDIOBIKE THESEUS Instructions De Montage Et Mode D'emploi

Computer operating instructions:
Function buttons:
To adjust values, e.g. target values
„UP" / „DOWN"
Starts the heart recovery rate measurement
„RECOVERY"
To reset a value. Press and hold this button for approx. 2 seconds to execute a full
„RESET"
reset (all values will be set to 0)
To confirm settings or select functions. This button can also be used as reset-button.
Press and hold this button for approx. 2 seconds to execute a full reset (all values will
„MODE"
be set to 0).
Before you start
Make sure the batteries are correctly inserted (please refer chapter "change of batteries"). The computer
starts working by using the pedals or pressing a button. After appr. 4 minutes of getting no signal the
computer shuts off to standby-mode automatically. In standby-mode room temperature and date/time will
be displayed.
When switching on the computer for the first time, the date and actual time need to be adjusted. Adjust
the values with "UP", "DOWN" and „MODE"-buttons.

COMPUTER | USE

41