Maintenance Works; Maintenance Contract; Frost Protection - Kärcher BD 50/60 C Ep Classic Mode D'emploi

Maintenance Works

Replace or turn vacuum lips
1 Wear indicator
2 Vacuum lip
The vacuum lips must be replaced or
reversed if they are worn down to the
wear indicator.
 Remove the vacuum bar.
 Unscrew the star grips.
 Remove the plastic parts.
 Remove the vacuum lips.
 Insert new or reversed vacuum lips.
 Insert the plastic parts.
 Screw in and tighten the star grips.
Replacing the disk brushes
 Push down the device holding the
push handle so that the cleaning
head is raised.
 Press the pedal for changing the
brushes downward beyond its re-
sistance.
 Pull the device towards the back so
that the disc brush becomes acces-
sible.
 Place a new disc brush on the floor
in front of the device.
 Drive the device with the raised
cleaning head over the new disc
brush and lower the cleaning head.
The brush locks into the drive.
Removing the waste water tank
 Drain off dirt water.
 Lift up the waste water tank and put
it aside.

Maintenance contract

To ensure a reliable operation of the
appliance maintenance contracts can
be concluded with the competent
Kärcher sales office.

Frost protection

In case of danger of frost:
 Empty the fresh and waste water
tank.
 Store the appliance in a frost-pro-
tected room.
7
-
EN 9