Care And Maintenance; Maintenance Schedule; Maintenance Works - Kärcher BR 35/12 C Bp Mode D'emploi

Care and maintenance

DANGER
Risk of injury. Turn the appliance switch to
"0" and pull the mains plug of the charger
prior to performing any work on the appli-
ance.
ATTENTION
Risk of damage for the appliance due to
leaking water. Drain the wastewater and re-
maining fresh water prior to performing
tasks on the appliance.
 Park the machine on an even surface.

Maintenance schedule

After the work
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
 Drain off dirt water.
 Remove the lid of the waste water tank
and wash the inside of the lid and the
float with water.
 Rinse the waste water tank with clear
water.
 Clean the vacuum bar.
 Remove bulk waste container and emp-
ty it.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Clean the vacuum lips, check for wear
and replace them if required.
 Clean brush.
 Check the brush for wear and replace if
required (see "Maintenance tasks").
 Charge battery if required.
Weekly
 Remove the water distribution bar on
the cleaning head and clean the water
channel.
1 Fresh water filter
2 Fluff filter
 Clean the fresh water filter.
 Clean the fluff filter.
Monthly
 Check the condition of the seals be-
tween waste water tank and cover, re-
place if required.
Yearly
 Have the prescribed inspection carried
out by the customer service.

Maintenance Works

Replacing the suction lips
 Compress the fastening devices and
pull the vacuum lips out of the vacuum
bar towards the bottom.
 Remove the vacuum lips from the hold-
er.
Note:
Thanks to the perforation pattern the vacu-
um lips cannot be mixed up. They cannot
be turned and reinstalled.
 Replace vacuum lips.
EN – 7 19