Question
What make-up removers
can be used with this
appliance?
How often does the soft
brush need replacing?
How often does the pore
focus brush need
replacing?
How many times per day
can I use the appliance?
Is it OK if the inside of the
socket cover gets wet?
Can I also use this on my
neck?
Will the battery
deteriorate if not used for
an extended period of
time?
Answer
You can use whichever oil-, gel-,
and cream-based type of make-up
remover that works for your skin.
(Do not use make-up removers
containing coarse materials for
scrubbing or those used for
exfoliation.)
Approximately every 3 months if
used once per day.
Approximately every 6 months if
used twice per week.
You can use the warming make-
up removal and brush cleansing
modes once per day. Use the
pore-targeted cleansing mode
twice per week.
The socket is waterproof for
normal usage. Before charging,
however, wipe off any water in
the socket.
You can use the soft brush for
1 minute once per week.
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
How to use
• Make sure the warming make-up removal plate is not cracked
or dirty before use.
• The appliance will not operate when connected to the AC
adaptor. The AC adaptor is used only for charging the appliance.
Warming make-up removal
The warming make-up removal plate loosens and easily
removes make-up.
1
1
Press the warming make-up removal switch and
select the desired temperature.
Warming make-up removal plate temperature options
Low ( ): approx. 43 °C
High (
): approx. 48 °C
• Pressing the warming make-up removal switch cycles
through the "Power OFF"
• The temperature is always set to "Low ( )" when the power
is turned on.
• It is recommended to use the appliance at the "Low ( )"
setting when first beginning use.
Notes
• The warming make-up removal mode indicator flashes
while warming up.
• It takes approximately 30 seconds for the appliance to
reach its usable temperature. (Assuming a room
temperature of 25 °C)
• The warming make-up removal plate temperature varies
depending on the usage environment.
• The set temperature may not be reached if the ambient
temperature is below 15 °C.
"Low ( )"
"High (
)" options.
13