36
9.0 NORMAL OPERATING SOUNDS
EN
*
* NOTE: "Quiet Mode" (NPS45 Only) This feature disables the convection blower when the stove is in pilot/
standby mode regardless of control setting. The blower will activate during ignition to cool components then
it will shutdown again. When ignition cycle is complete, if stove is in heat level #1, the blower will shutdown. If
the blower is running in heat levels #2 - #5 and the appliance is adjusted to heat level #1, the blower will stay
on until the components cool down, the same applies in T-STAT mode.
W415-1472 / A / 10.11.16