14
3.3
STOVE MINIMUM CLEARANCE TO COMBUSTIBLES
EN
DO NOT INSTALL INTO ANY AREA HAVING LESS THAN 48" (1219mm) (CEILING TO APPLIANCE
3.3.1 STRAIGHT INSTALLATION
Through the Wall Installations complete
3.3.2 CORNER INSTALLATION
Through the Wall Vents complete with outside air
NOTE: If interior vertical pellet vent is used, the clearance to the back wall is determined by the
upward-turning elbow or "Tee". It will vary in depth depending on the brand of pellet vent used (it is
approximately 5" (127mm). Before placing the appliance, connect the elbow or "Tee" and allow for the
minimum 3" (76mm) clearance to the combustible wall.
W415-1472 / A / 10.11.16
BOTTOM, EXCLUDING HEARTH HEIGHT).
with outside air
WARNING
!
Interior Vertical Vents
Interior Vertical Vents
45°
6"
6"
2"
2"
2"
6"
Floor Protection