Lcd Display Instruction - aquatermic XK79 Manuel D'utilisation

Wired Controller XK79

1.2 LCD Display Instruction

No. Symbols
*
1
2
3
*
4
5
6
7
8
9
*
10
*
11
12
*
13
14
15
16
17
Table 1.1 LCD display instruction
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable.)
Up and down swing function
Cooling mode
Left and right swing function
Dry mode
It's valid under Save mode and displays during setting process.
Temperature lower limit for Cooling: Limit the minimum temperature value
under Cooling or Dry mode.
Temperature upper limit for Heating: Limit the maximum temperature value
under Heating, Space Heating or 3D Heating mode.
Fan mode
Heating mode
It shows the setting temperature value (In case the wired controller is
controlling a Fresh Air Indoor Unit, then the temperature zone will display
FAP)
Floor Heating mode (When Heating and Floor Heating simultaneously
shows up, it indicates 3D Heating is activated.)
Space Heating mode
Sleep status
Air status, Indoor unit optional function
When inquiring or setting project number of indoor unit, it displays "NO."
icon
Quiet status (including Quiet and Auto Quiet two status)
Display "SET" icon under parameter setting interface
Light On/Off function
Instructions
2