Clock Setting - aquatermic XK79 Manuel D'utilisation

Wired Controller XK79

4.5.2 Clock Setting

Clock display: when the timer setting way is clock timer, timer zone displays
system clock in unit On and Off status. "
this time.
Clock setting: long press TIMER button for 5s to enter clock setting and "
is blinking. Pressing "▲" or "▼" button increases or decreases clock time by 1min;
holding "▲" or "▼" button for 5s increases or decreases clock time by 10min; Press
SWING/ENTER button or TIMER button to save the setting and then exit setting.
4.5.3 Clock Timer
Unit On/Off at a certain time can be set through clock timer.
Set Timer:
Fig. 4.3 Timer Off setting in unit On status
" icon is bright and the clock can be set at
24
" icon