Temperature Setting - aquatermic XK79 Manuel D'utilisation

Wired Controller XK79

4.3 Temperature Setting

Pressing "▲" or "▼" button in On status increases or decreases set temperature
by 1° C; holding "▲" or "▼" button increases or decreases set temperature by 1°C every
0.3s.
In Cooling, Fan, Heating, Floor Heating, 3D Heating or Space Heating mode,
temperature setting range is 16° C~30° C.
In Dry mode, the temperature setting range is 12° C, 16° C~30° C. In Dry mode,
when temperature is 16°C, continuously press "▼" button twice to decrease
temperature to 12° C (when Save function is activated, the temperature in Dry mode
can't be adjusted to 12°C and the setting range is "lowest temperature in Save mode" ~
30° C).
Note:
① Under Auto mode or Out function is activated, the setting temperature can not
be adjusted by pressing "▲" or "▼".
② When the wired controller is connected with a Fresh Air Indoor Unit, fresh air
indoor unit code "FAP" will be displayed as shown below. Setting
temperature won't be displayed and can't be adjusted via "▲" or "▼"
button. The air outlet temperature in cooling or heating can only be set in the
parameter setting status.
22