aquatermic XK79 Manuel D'utilisation page 36

Wired Controller XK79
Turn on Filter Clean Reminder Function: When unit is on, press FUNCTION button
and select Filter Clean Reminder. "
adjust the cleaning level, of which the range is 00, 10-39. Press SWING/ENTER to turn
on this function.
Turn off Filter Clean Reminder Function: When unit is on and this function has
been turned on, press FUNCTION button and select Clean. Then "
blink. Set the cleaning level as 00 and press SWING/ENTER button to cancel this
setting.
When Filter Clean Reminder time is up, "
clean the filer. Press FUNCTION button to turn to Filter Clean Reminder Function, then
press SWING/ENTER to cancel reminding, and it will retime according to the original
cleaning level. The clean reminding can be cancel only when you didn't reset the
cleaning level under the setting of Filter Clean Reminder Function.
Fig.4.8 Shows how to turn on Filter Clean Reminder function:
Fig.4.8 Turn on Filter Clean Reminder Function
" icon will blink. Press "▲" or "▼" button to
" icon will light up to remind you to
32
" icon will