Filter Clean Reminder Setting - aquatermic XK79 Manuel D'utilisation

Save Setting for Heating: When unit is on and under Heating, 3D Heating and
Space Heating modes, press FUNCTION button to select Save function. "
blink and MAX icon lit up. Press "▲" or "▼" button to adjust the MAXIMUM temperature.
Press SWING/ENTER button to turn on this function.
Turn off Save Function: Press FUNCTION button and select Save function. "
icon blinks. Then press SWING/ENTER button to cancel this setting.

4.12 Filter Clean Reminder Setting

Filter Clean Reminder Function: Unit will remember its own operating time. When
the setting time is up, this function will remind you to clean the filer. A dirty filter will
result in bad heating and cooling performance, abnormal protection, bacteria gathering,
etc.
Fig.4.7 Save Setting for Cooling
31
Wired Controller XK79
" icon will
"