aquatermic XK79 Manuel D'utilisation page 19

Parameter
Parameter name
code
Entrance of
C00 adjustable
parameter
View the project
number of indoor
C01 unit and locate
the faulted
indoor unit
View the indoor
unit quantity of
C03
the system
network
View priority
C06
operation
Table 3.1 Parameters viewing list
Parameter range
-
1-255：Project
number of online
indoor unit
1-80
00: normal
operation
01: priority
operation
15
Wired Controller XK79
Viewing method
In "C00" status, Timer zone shows the
current indoor unit project number. When one
wired controller is controlling multiple indoor
units, then only the smallest project number
will be displayed.
Operation method:
Enter viewing, press MODE button in "C01"
status to enter the interface of viewing indoor
unit project number. Press "▲" or "▼" button
to select the project number of indoor unit.
Display method:
Temperature zone: displays error codes of
the current indoor unit( The temperature
zone will display the error codes in turn with
an interval of 3 seconds if there are several
malfunctions in one indoor unit.)
Timer zone: displays present indoor unit
project number /C5 malfunction of project
number conflict
Note:
① If master indoor unit exists in current
indoor unit network, "MASTER" icon will
be bright under "C01" interface. After
entering the interface of viewing project
number, "MASTER" icon will be bright
only when the project number of master
indoor unit is selected.
② System will not exit "C01" viewing
automatically. User has to exit this
interface manually.
Timer zone: display indoor unit quantity of
the system
Operation method:
Enter viewing: press MODE button in "C06"
status to enter the interface of viewing
priority operation. Press "▲" or "▼" button to
select indoor unit.
Display method:
Temperature zone: displays current indoor
unit project number;
Timer zone: displays current priority
operation setting value of indoor unit.