Operation Instructions; On/Off - aquatermic XK79 Manuel D'utilisation

Wired Controller XK79
accumulated
time
Opening angle
of indoor unit
P49
air-return
plate*
Air outlet
temperature
setting for
P50
Fresh Air
Indoor Unit in
cooling*
Air outlet
temperature
setting for
P51
Fresh Air
Indoor Unit in
heating*
Union setting
P54 of Fresh Air
Indoor Unit*
Note:
① Under parameter setting status, FAN, TIMER button are invalid. Press
"ON/OFF" button to go back to homepage, but not turning on/off the unit.
② Under parameter setting status, the signal from remote controller is invalid.

4. Operation Instructions

4.1 On/Off

Press ON/OFF button to turn on the unit.
Press ON/OFF button again to turn off the unit.
The interfaces of On/Off status are shown in fig. 4.1 and 4.2.
01：angle 1(25° )
02：angle 2(30° )
03：angle 3(35° )
16℃～30℃
16℃～30℃
00: without union
control
01: with union control
20
Only applicable to units with
01
air-return plate
Only applicable to Fresh Air
18℃
Indoor Unit
Only applicable to Fresh Air
22℃
Indoor Unit
After union function is set,
Fresh Air Indoor Unit will be
turned on/off following the
on/off status of common indoor
00 unit. Besides, Fresh Air Indoor
Unit can also be turned on/off
manually.
Note: only applicable to Fresh
Air Indoor Unit