Light On/Off Setting; Save Setting - aquatermic XK79 Manuel D'utilisation

Wired Controller XK79
Level of
Air 1
setting
Opening
time of
60/6 60/12
fresh air
valve
Note: time indicated in the table: unit's operating time (min) / opening time of fresh air valve per

4.10 Light On/Off Setting

Light On/Off Function: Light of indoor unit can be turned on or off.
Turn on the Light: When unit is on or off, press FUNCTION button to select Light
function." " icon will blink. Press SWING/ENTER to turn on the light.
Turn off the Light: When light of indoor unit is on, press FUNCTION button to select
Light. Then press SWING/ENTER to turn off the light.
Note：When there is no button operation on the wired controller or no remote control
signal is received for 20s continuously:
① If Light function is activated, the back light of LCD will turn to half bright;
②
If Light function is off, the back light of LCD will be off.

4.11 Save Setting

Save Function: Air conditioner can be operated in small temperature range by
setting the minimum temperature under Cooling and Dry modes and setting maximum
temperature under Heating, 3D Heating and Space Heating modes. Thus, energy
saving can be realized.
Save Setting:
Save Setting for Cooling: When unit is on and under Cooling or Dry mode, press
FUNCTION button to select Save function. "
Press "▲" or "▼" button to adjust to the minimum temperature. Press SWING/ENTER
button to activate this function.
Fig.4.7 Shows how to set Save function for Cooling:
2 3 4
60/18 60/24
operating time (min)
6 7
5
60/36 60/42
60/30
" icon will blink and "MIN" icon lit up.
30
8 9
60/48 60/54 Always
on
10