Location Of The Gas And Electric Outlets; Installing The Backguard; Installing The Front/Side Skirting - Electrolux ECFD3068AS Instructions D'installation

30" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
The side cabinet depth (clearance F) must match
the front edge of the range side panel:
Location of the gas and electric
outlets
D
Min: 5" 7/8
Groun
Min: 5" 13/16
L
ded
Max: 12" 3/16
outlet
Min: 2"
(X)
M
Max: 9" 7/8
Gas
Min: 2"
N
sup-
Max: 11" 13/16
ply
Min: 2"
Line
P
(Y)
Max: 10" 7/8

Installing the backguard

The backguard provided is an integral part of the
appliance; it must always be positioned and secured
correctly on the cooktop.
You can find the assembly instruction for the back-
guard in the instructions sheet provided.
Once you have fixed the backguard to the appli-
ance, you must insert the screws and spacers pro-
vided that are necessary for the slot-in installation.

Installing the front/side skirting

The front skirting must always be correctly posi-
tioned and secured to the appliance.
1. Use a screwdriver to remove the front screws.
Min: 150 mm
Min: 148 mm
Max: 310 mm
Min: 51 mm
Max: 250 mm
Min: 51 mm
2. Position the front skirting at the bottom of the
Max: 300 mm
Min: 51 mm
Max: 275 mm
5
appliance and line up the holes on the side of the
skirting with the holes on the base of the appli-
ance.