Safety Information - SEFRAM MW 3950B Notice D'utilisation

 Warning Safety sheet
 Warning
Safety sheet
. . . . . . . . . .
. . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . . .
 Safety Information
To ensure safe operation and service of the
Tester, follow these instructions. Failure to
observe warnings can result in severe INJURY
or DEATH.
 Warning
To prevent possible electrical shock, fire, or
personal injury.
• If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the equipment may be impaired.
• Always use proper range for measurements.
• To reduce the risk of fire or electric shock, do
not use this product around explosive gas or
in damp locations.
• Verify the Meter operation by measuring a
known current. If in doubt, have the Meter
serviced.
• To avoid false readings that can lead to
electric shock and injury, replace battery as
soon as low battery indicator appears.
• Avoid working alone so that assistance can
be rendered.
• Do not use the Tester if the Tester is not
operating properly or if it is wet.
• Individual protective device must be used if
hazardous live parts in the installation where
the measurement is to be carried out could
be accessible.
• Use caution with voltages above 30 Vac rms,
42 Vac peak, or 60 Vdc. These voltages pose
a shock hazard.
1
 Read First