IMPORTANT
• The CAM1 or CAM2 icon will appear on the menu to indicate which Nursery Unit
is broadcasting sound
• In split view, some function won't be available (greyed out)
PAIRING YOUR ADDITIONAL SENSOR PAD TO YOUR NEW CAMERA UNIT
(FOR MODEL ACAM2)
In order to connect your second Sensor Pad
to your second Nursery Unit, you need to make
sure the second Nursery Unit is paired with the
Parent Unit first
1. Remove the batteries of both Sensor Pad
(if you have two)
2. Select Nursery Unit 2 in the view mode
• Make sure CAM2 is selected in order to
change the settings of the Nursery Unit 2
and Sensor Pad 2
3. Go into the General setting menu
4. Go into the Pairing Icon
5. In the Pairing Menu, select Sensor Pad 2
Icon
6. Insert the battery into the Sensor Pad 2
(the additional Sensor Pad). It will
automatically activate it
7. If the connection has been made, the
Green Successful Pairing Icon
on the screen and the menu will show the
OK Paired Icon
8. Otherwise, the Red Failed Pairing Icon
will appear on the screen. You will need
to try again
9. You can now replace the battery of your
Sensor Pad 1
IMPORTANT
Refer to your existing model full user manual (www.angelcarebaby.com/manuals) to get more
information on how to set up the Sensor Pad:
• The additional Nursery Unit and Sensor Pad must be positioned 2 metres (6.5 feet) minimum
from any existing Nursery Unit and Sensor Pad as they could interfere with performance
• Test your monitor before first use
• Prior to use, and on a regular basis (before placing your child in the cot) always check the
Sensor Pad is detecting no movements or vibrations in its environment
• Test your monitor every time you move the Sensor Pad to a different place
• If your cot does not have a solid, stationary, completely flat, firm surface place a hardboard
between the cot base and the Sensor Pad (refer to specification in your existing manual)
6
2
3
4
5
will appear
6
VOX
ON
ON
OFF
2
3 MIN
VOX