Operating Instructions - Flex L 15-10 150 Notice D'utilisation

466.387_L15-10 150_L21-8 180_L26-6 230.book Seite 11 Montag, 19. März 2018 2:35 14
L 15-10 150 / L 21-8 180 / L 26-6 230

Operating instructions

WARNING
Risk of electric shock! Before carrying out
any work on the power tool, always
disconnect the tool from the power supply.
Before switching on the power
tool
Unpack the angle grinder and check that
there are no missing or damaged parts.
1. Connect the guard to the clamping
flange with the clamping ring by
inserting the cam on the clamping ring
into the groove on the flange (1.).
2. Rotate guard hood into the required posi-
tion (2.) and tighten clamping lever (3.).
3. Attach the auxiliary handle.
Switch on and off
Brief operation without engaged
switch rocker
1. Press and hold down the starting
lockout (1.).
2. Press the switch (2.).
3. To switch off, release the switch.
Continuous operation with engaged
switch rocker
1. Press and hold down the starting
lockout (1.).
2. Press and hold down the switch (2.).
3. Press the locking button (3.).
Instruction manual
11