Opening Limit Switch Adjustment; Closing Limit Switch Adjustment - BFT FABER BT Mode D'emploi

OPENING LIMIT SWITCH ADJUSTMENT

Move the cam to 5 mm from
the edge of the bracket

CLOSING LIMIT SWITCH ADJUSTMENT

Close the gate�
Repeat the same operations for the other leaf!
50
- FABER BT - FABER L BT KIT
Unlock the operator as shown
and
OPEN the leaf ad far as
required :
Screw the FC1 cam screw in�
(CLOSE)
FC2
Unscrew the FC2 cam screw
As the last operation:
block the gate�
Open the gate�
Move the cam to 5 mm from
the edge of the bracket
(OPEN)
FC1
Unscrew the FC1 cam screw
B
Screw the FC2 cam screw in�
WARNING! To prevent the limit
switch wire from breaking, fix
screw A keeping wire B taut�
A