Introduction; Getting Started - IKEA ESSENTIELL Mode D'emploi

EN
Thank you for choosing IKEA.
This User Manual is part of our commitment
to customer satisfaction and product quality
throughout the service life of your new
appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.
_________________________________
Purchase Date
_________________________________
Model Number
_________________________________
Serial Number

NOTE
Why Energy Efficient Units run long cycles:
Several factors are important to washing
dishware. The energy use of the dishwasher
was reduced by applying more of the factors
that don't use so much energy and less of the
ones that use more. As a result, you will see
that the wash cycles take longer.

NOTE
The dishwasher is programmed to remember
your last cycle so you do not have to reset
each time. To start the dishwasher using
the same cycle and options selected on the
previous wash, just press the START/Cancel
pad.

NOTE
Lights on the console will remain on once Lights on the console will remain on once
the door is shut and wash cycle begins. If it the door is shut and wash cycle begins. If it
is preferred to have the lights turn off while is preferred to have the lights turn off while
cycle is running see Console Lights section cycle is running see Console Lights section
for instructions. for instructions.

INTRODUCTION


NOTE
Very Important Information - Read
Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most
dishwashers - IT'S QUIETER.
Your Direct Feed Wash System dishwasher
uses energy efficient motors for the wash and
drain portions of the cycle you select. Each
cycle has a series of water fills and drains for
washing and rinsing dishes. As each cycle
begins, you may-or may not- hear the drain
motor. The next sound you will hear is the
splashing water as it enters the tub.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON'T
hear.

Getting Started

1. Load Dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Select desired CYCLE (See Cycle Chart).
The indicator light will glow when selected.
5. Select desired OPTION (See Energy
Options). The indicator light will glow when
selected.
6. Run hot water faucet nearest dishwasher
until water is at or near 120
performance (See Water Temperature). Turn
water off.
7. To start, press START/Cancel pad.
8. Close door to latch.

NOTE
If the dishwasher door is opened while the
unit is running, the START/Cancel pad must
be pressed and the door shut immediately
to return the unit to the selected cycle and
option, this must happen within 10 minutes
for the unit to continue the cycle.
F for optimal
0
5