Features At A Glance; Operating Instructions; Wash Cycle Selections - IKEA ESSENTIELL Mode D'emploi

FEATURES AT A GLANCE

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces. First, the dishwasher fills with water covering the filter area. Water is
then pumped through the spray arms. Soil particles go across the filter and down the drain as the
water is pumped out. This series of steps are repeated as needed. The number of water fills vary
with the cycle being used.
Cup Shelves
Middle Spray Arm
Lower Spray Arm
Overfill Protector
Detergent
Dispenser
Rinse Aid

OPERATING INSTRUCTIONS

Wash Cycle Selections

Cycle times are approximate and will vary with Cycle times are approximate and will vary with
options selected. Hot water is necessary to options selected. Hot water is necessary to
activate dishwasher detergent and melt fatty activate dishwasher detergent and melt fatty
food soils. An automatic sensor will check food soils. An automatic sensor will check
the incoming water temperature and, if it is the incoming water temperature and, if it is
not hot enough, the cycle will be lengthened not hot enough, the cycle will be lengthened
for automatic water heating in the main wash for automatic water heating in the main wash
and final rinse of all cycles. This happens and final rinse of all cycles. This happens
even when Hi-Temp Wash option has not been even when Hi-Temp Wash option has not been
selected. Hi-Temp Wash is selected, an even selected. Hi-Temp Wash is selected, an even
higher temperature will be reached to handle higher temperature will be reached to handle
heavier soil loads. heavier soil loads.

NOTE
Lights on the console will remain on once Lights on the console will remain on once
the door is shut and wash cycle begins. If it the door is shut and wash cycle begins. If it
is preferred to have the lights turn off while is preferred to have the lights turn off while
cycle is running see Console Lights section cycle is running see Console Lights section
for instructions. for instructions.
6
Nozzle or Spray Arm
(located inside the unit)
Option Selections
select Models)
Hi-Temp Wash Option
When Hi-Temp Wash option is selected, the When Hi-Temp Wash option is selected, the
dishwasher heats water in the main wash to dishwasher heats water in the main wash to
approximately 140 approximately 140
This increase in water temperature helps the This increase in water temperature helps the
dishwasher detergent remove food grease and dishwasher detergent remove food grease and
soil from dishes more effectively and aids in soil from dishes more effectively and aids in
drying. Hi-Temp Wash option is available on drying. Hi-Temp Wash option is available on
Power Plus, Normal Wash and Top Rack cycles. Power Plus, Normal Wash and Top Rack cycles.
Hi-Temp Wash is automatically provided when Hi-Temp Wash is automatically provided when
the Power Plus cycle is selected. the Power Plus cycle is selected.
When Hi-Temp Wash option is selected, the When Hi-Temp Wash option is selected, the
indicator light will come on and remain on until indicator light will come on and remain on until
end of cycle. To turn off the Hi-Temp Wash end of cycle. To turn off the Hi-Temp Wash
option, press Hi-Temp Wash a second time. The option, press Hi-Temp Wash a second time. The
indicator light will turn off. indicator light will turn off.
Bowl Tines
Top Rack
Serial Label
(Located on Right)
Lower Rack
Silverware Basket
Glass Trap
Heating Element
(available on
F (60 F (60 C). C).
o o o o
EN