Cables Connection Between Air Condition Displays And Vav System Controller - Airwell DLS VAV SYSTEM Manuel D'installation Et D'utilisation

IR RECEIVER
IR TRANSMITER
1=ON
2=ON
1=OFF
2=ON
Cables Connection between air condition Displays
and VAV SYSTEM controller.
The Air condition is supplied with Infra red receiver display and Connection
cable 7 meters long.
This original cable is used to connect between the Air condition display and
the air condition controller.
It is possible to receive two different types of connectors with the air condition
unit.
‹ Square Type - ePAD connector.
‹ Round type - 8 DIN connector.
• Air condition with Square Type - ePAD connector
Inside the VAV SYSTEM carton box you will find additional cable 7 Meters
long, Use this cable between the VAV SYSTEM and the air condition display.
At the VAV SYSTEM , Plug it to the connector marked " Display"
At the box of the VAV SYSTEM controller you will find two halves of a cylinder.
(Black color) these are parts of cable filter.
8
MOTORIZED MOTORIZED
DAMPER 10" DAMPER 10"
SPLITER
>>> 2x10" >>> 40/50x15 cm
>>> 2x8" >>> 30x15 cm
IR RECEIVER
MOTORIZED
DAMPER 8"
IR TRANSMITER
SPLITER
ROOM #1
MOTORIZED
DAMPER 8"
ROOM #2