Atag FR3171M Notice D'utilisation page 72

INSTALLATION INSTRUCTIONS
GB18
4. Remove the protective foil from the sealing tape and tape the strip
in the groove of the aluminium profiles or on the edge of the deep-
frying pan. Do not tape the sealing strip along the corners. Instead,
cut 4 pieces that fit tightly together in the corners.
5.
Turn the appliance over and place it in the cut-out.
6. Attach the deep-frying pan using the mounting brackets supplied.
For worktops up to 40 mm in thickness, place filler blocks between
the brackets and the worktop. The screws should be screwed into
the threaded holes.
7. Connect the appliance to the mains.
building in